Chester County, PA · Level 2 chimney inspection

Chimney Inspection in Chester County

Chester County has stone farmhouse fireplaces older than the country, 1960s and ’70s homes along the Main Line with three flues in one stack, and new construction in Downingtown and Exton with gas inserts. A ValueGuard Level 2 chimney inspection runs a camera through the flue and checks the chimney from the cap to the hearth.

The findings on this page come from a recent ValueGuard Level 2 report in Berwyn.

Chester County Level 2 chimney inspection at a glance

✓
From $329First chimney · $175 each additional on the same property
✓
CSIA-certified inspectorTyler Gilger, trained at the CSIA Technology Center
✓
Full video flue scanEvery joint, top to bottom, saved to your report
✓
Inspection onlyWe don’t sweep, reline or rebuild chimneys
✓
Since 199794,000+ inspections · 4.9★ on Google

The short answer

Cost$329 for the first chimney, $175 for each additional chimney on the same property. Price confirmed before the visit.
What you getA photo- and video-documented report on the flue, crown, cap, flashing, firebox, damper, smoke chamber and clearances, emailed to you and your agent by the next business day.
What we’re findingA recent report on a 1974 Berwyn home with three fireplaces found liner gaps, mortar slag, a cracked crown and a missing damper.
Who should bookBuyers of any Chester County home with a fireplace, wood stove or insert, and anyone who has added or changed a stove, insert or furnace.
Service areaAll of Chester County: Berwyn, Wayne, Devon, Paoli, Malvern, West Chester, Downingtown, Exton, Phoenixville, Chester Springs, Kennett Square and Oxford.

✦✦✦

Quick answer

Do I need a Level 2 chimney inspection when buying a home in Chester County?

If the home has a fireplace, wood stove or insert you plan to use, yes. NFPA 211 calls for a Level 2 inspection when a property is sold or transferred, and again when an appliance or fuel type is changed, which is common in Chester County homes that have added wood stoves or gas inserts. A recent ValueGuard Level 2 on a 1974 home in Berwyn found gaps in the flue liner, mortar slag, a cracked crown and a fireplace with no damper. ValueGuard’s Level 2 is $329 for the first chimney and $175 for each additional chimney.

✦✦✦

Chester County chimneys cover more ground than any other county we serve. In Chester Springs, Kennett Square and around West Chester there are stone farmhouses with walk-in fireplaces and stoves added over the years. Easttown and Tredyffrin have post-war homes with several fireplaces on one stack. And the newer subdivisions of Downingtown, Exton and Malvern are built around factory-built fireplaces and gas inserts. Each one needs a different kind of attention, and the flue is the part that tells you the most.

✦✦✦

I. Real findings

What the camera found in Berwyn.

A 1974 Berwyn home with three fireplaces venting through one stucco stack. Here’s what the outside showed and what the camera found inside.

Cracked crown on a stucco chimney with three clay flues at a 1974 Berwyn home in Chester CountyCracked crown

Berwyn · Nov 2026

Three fireplaces, one stack and a cracked crown

From the report

CrownCracked
ChimneyStucco-clad, three clay flues
FireplaceDamper missing

Three fireplaces vent through this one stucco chimney, and the crown that protects all three flues was cracked. Water that gets in through a crown crack reaches every flue below it. One of the fireplaces also had no damper at all, so heated air goes straight up the chimney whenever the fireplace isn’t in use.

Gap in a terra-cotta flue liner seen on the Level 2 camera scan in a Berwyn chimneyFlue damage

Berwyn · Nov 2026

Gaps and leftover mortar inside the clay liner

From the report

Flue linerGaps / open joints
Flue linerExcess mortar slag

On camera, the terra-cotta liner had open joints that can let smoke and exhaust reach the masonry and framing around the flue, plus mortar slag that narrows the flue and collects creosote. None of this was visible from the roof or the firebox. Tyler recommended repair by a chimney professional.

Next door

Narberth, Montgomery County

1921

Stucco-clad chimney, clay liner

Elsewhere on the Main Line · Oct 2026

Same pattern a few stops east

From the report

Flue linerGaps, several locations
StuccoStaining
Spark arrestorMissing

A 1921 Narberth home also had gaps in its clay liner behind a stucco exterior. Older Main Line chimneys on both sides of the county line are showing the same kind of liner wear. See the Montgomery County reports.

Findings are taken from ValueGuard Level 2 chimney reports. Addresses are withheld. See a sample report.

✦✦✦

II. Why Chester County chimneys are different

Farmhouses, Main Line stacks and gas inserts.

What we look hardest at depends on which part of Chester County the house is in.

Stone farmhouses and boroughs

Chester Springs, Kennett Square, West Chester and Phoenixville have stone and brick homes with large fireplaces, old or partial liners and stoves added over the decades. Clearances to old framing get close attention.

Post-war Main Line homes

Berwyn, Wayne, Devon and Paoli homes from the 1950s–70s often vent several fireplaces through one stack. One cracked crown, like the one in our Berwyn report, affects every flue beneath it.

New construction and gas

Downingtown, Exton and Malvern subdivisions rely on factory-built fireplaces and gas inserts. Venting, metal flues and the chase cover on top are what we focus on.

Stoves and inserts added later

A wood stove or insert set into an old fireplace needs a properly sized liner. NFPA 211 calls for a Level 2 whenever an appliance or fuel type is changed, not just at sale.

✦✦✦

III. What a Level 2 covers

From the cap to the hearth.

A Level 2 examines every accessible part of the chimney system and records the inside of the flue on video, including where the chimney passes through the attic and basement.

✓Video camera scan of the full flue interior, saved to your report
✓Flue liner condition: cracked tiles, open joints, gaps, offsets and mortar slag
✓Crown, cap, spark arrestor, exterior masonry or stucco and roof flashing
✓The chimney in accessible attics, basements and crawlspaces
✓Clearances to combustible framing, trim and insulation
✓Firebox, damper, smoke chamber, hearth and hearth extension
✓Creosote and soot buildup, blockages and debris
✓Connector pipes for stoves, inserts, furnaces and water heaters
Level 1Level 2 · ValueGuardLevel 3
WhenAnnual check, nothing changedSale or transfer, appliance or fuel change, after a chimney fire or stormSerious hidden damage suspected
Flue video scanNoYes, full lengthYes
Attics, basements, clearancesNoYes, where accessibleYes
Removes masonry or wallsNoNoYes

NFPA 211 is the national standard for chimneys, fireplaces and vents. A standard home inspection is not a Level 1, 2 or 3 chimney inspection: the home inspector reports on what is visible, while a Level 2 is a dedicated chimney evaluation with a camera inside the flue. If the scan shows damage that can only be confirmed by opening the structure, the report says so and recommends a Level 3 by a chimney contractor.

✦✦✦

Pricing

One price, set before we arrive.

The same price anywhere in Chester County, from a Wayne split-level to a Chester Springs farmhouse.

$329

First chimney

$175

Each additional chimney, same property and visit

$504

Example: a house with two chimneys

Not sure how many chimneys you have? Tell us when you book and we’ll confirm the price before the visit. See all ValueGuard pricing.

✦✦✦

Your chimney inspector

Meet Tyler Gilger.

Tyler Gilger, CSIA Level 2 chimney inspector and VP of Field Operations at ValueGuard

VP, Field Operations · CSIA Level 2 chimney inspector

Every ValueGuard Level 2 chimney inspection is performed by Tyler, our Vice President of Field Operations, who completed CSIA training at the Chimney Safety Institute of America’s Technology Center. With more than 2,500 home inspections behind him, plus thermography, sewer scope and FAA drone certifications, he knows how a chimney fits into the rest of the house.

Read Tyler’s full bio →
Tyler Gilger running the flue camera from the hearth of an arched brick fireplace during a ValueGuard Level 2 chimney inspection
Running the flue camera from the hearth; the footage goes into your report.
ValueGuard inspector Tyler Gilger guiding the inspection camera into the firebox and smoke chamber
Working the camera into the smoke chamber above the firebox.

✦✦✦

IV. How it works

Three steps, one visit.

1

Schedule

Book online or call (215) 860-3150. Tell us how many chimneys and what’s connected to each, including any stove or insert. Please don’t use the fireplace or stove for 24 hours before the visit.

2

On-site inspection

Tyler examines the chimney inside and out, checks the attic and basement, and runs a camera through the full length of the flue.

3

Your report

A clear report with photos and flue video is emailed to you and your agent by the next business day.

✦✦✦

V. Across Chester County

From Berwyn to Kennett Square.

We inspect chimneys anywhere in Chester County, usually during the same visit as the home inspection: Berwyn, Wayne, Devon, Paoli, Malvern, West Chester, Downingtown, Exton, Phoenixville, Chester Springs, Kennett Square and Oxford.

Chimney inspections in other counties: Philadelphia · Montgomery County · Delaware County · Bucks County

✦✦✦

VI. Questions we get

Chester County chimney inspections, answered.

How much does a chimney inspection cost in Chester County?+
A ValueGuard Level 2 chimney inspection is $329 for the first chimney and $175 for each additional chimney on the same property, inspected in the same visit. The price is confirmed before we arrive, and it’s the same whether you add it to your home inspection or book it on its own.
We have a wood stove insert in an old fireplace. Can you inspect it?+
Yes. A Level 2 covers the stove or insert connection, the liner it vents into and the chimney around it. NFPA 211 calls for a Level 2 when an appliance is added or changed, so it’s the right inspection whether you’re buying or have just installed a stove.
Do you inspect older farmhouse chimneys?+
Yes. We inspect masonry chimneys of any age, including stone farmhouse chimneys with large fireplaces. A Level 2 is non-invasive, so if the camera shows damage that can only be confirmed by opening the structure, the report says so and recommends a Level 3 by a chimney contractor.
Does the chimney need to be cleaned before the inspection?+
No. Just don’t use the fireplace or stove for 24 hours before the visit. If there’s heavy creosote or soot, the report will recommend sweeping.
Does a standard home inspection include the chimney?+
A home inspection reports on the visible parts of the chimney: the exterior, crown and flashing where the roof is accessible, and the firebox and damper. It doesn’t include a camera scan of the flue, which is where our Berwyn inspection found the liner gaps. A Level 2 is a separate chimney evaluation you can add to your home inspection.
Do you sweep or repair chimneys?+
No. ValueGuard is inspection-only. We don’t sweep, reline, rebuild or repair chimneys, so there’s no reason for us to find work that isn’t there. The report tells you what was found and what kind of professional to call.

Buying in Chester County?

See inside the chimney before you sign.

Level 2 chimney inspection from $329 · add it to any ValueGuard home inspection or book it on its own

Schedule Level 2 — $329Ask a question

or call (215) 860-3150

ValueGuard Home Inspections · 100 E Penn Square, Suite 400, Philadelphia, PA 19107 · (215) 860-3150 · Mon–Fri 8:30am–5:00pm, Sat 9:00am–4:00pm