Delaware County, PA · Level 2 chimney inspection

Chimney Inspection in Delaware County

Delaware County chimneys run from 1920s brick twins in Upper Darby, Drexel Hill and Havertown to the factory-built fireplaces in Newtown Square and Media subdivisions. Each type fails in its own way, and most of it is out of sight. A ValueGuard Level 2 chimney inspection runs a camera through the full flue and checks the chimney from the cap to the hearth.

The findings on this page come from a recent ValueGuard Level 2 report in Newtown Square, plus homes we inspected just over the county line.

Delaware County Level 2 chimney inspection at a glance

✓
From $329First chimney · $175 each additional on the same property
✓
CSIA-certified inspectorTyler Gilger, trained at the CSIA Technology Center
✓
Full video flue scanEvery joint, top to bottom, saved to your report
✓
Inspection onlyWe don’t sweep, reline or rebuild chimneys
✓
Since 199794,000+ inspections · 4.9★ on Google

The short answer

Cost$329 for the first chimney, $175 for each additional chimney on the same property. Price confirmed before the visit.
What you getA photo- and video-documented report on the flue, crown, cap, flashing, firebox, damper, smoke chamber and clearances, emailed to you and your agent by the next business day.
What we’re findingA recent Newtown Square report found cracked firebox panels in a 1994 fireplace. Just over the county line, we’ve found open joints and cracked tiles in pre-war clay liners.
Who should bookBuyers of any Delaware County home with a fireplace, wood stove or insert, and owners of twins who share a chimney with the house next door.
Service areaAll of Delaware County: Havertown, Drexel Hill, Upper Darby, Lansdowne, Springfield, Media, Wallingford, Swarthmore, Newtown Square, Broomall, Garnet Valley and Aston.

✦✦✦

Quick answer

Do I need a Level 2 chimney inspection when buying a home in Delaware County?

If the house has a fireplace, wood stove or insert you intend to use, yes. NFPA 211 calls for a Level 2 inspection whenever a property is sold or transferred, because only a camera scan shows the inside of the flue. A recent ValueGuard Level 2 in a 1994 Newtown Square home found cracked firebox panels, and nearby pre-war homes have shown open joints and cracked tiles inside the flue liner. ValueGuard’s Level 2 is $329 for the first chimney and $175 for each additional chimney.

✦✦✦

Delaware County packs a century of chimney styles into a small area. The brick twins and rows of Upper Darby, Drexel Hill, Yeadon and Havertown went up in the 1920s with clay-tile flues. Lansdowne, Media and Swarthmore have Victorians and stone singles with several fireplaces. And the newer neighborhoods of Newtown Square, Broomall and Garnet Valley rely on factory-built fireplaces with metal flues. A Level 2 is the same inspection for all three, but what we look hardest at changes from house to house.

✦✦✦

I. Real findings

In Delco, and right next door.

Our Newtown Square report, plus what we found just over the line in Wynnefield and Narberth, which have the same pre-war housing as eastern Delaware County.

Cracked refractory panel in the firebox of a 1994 Newtown Square fireplace in Delaware CountyFirebox

Newtown Square · Oct 2026

A 1994 fireplace with cracked firebox panels

From the report

FireboxCracked panel(s)
ChimneyStucco-clad, metal liner
Built1994

The one item on this report was inside the fireplace: cracked firebox panels. In a fireplace like this, those panels protect the firebox and the framing around it from heat, so cracked ones should be evaluated and replaced before the fireplace is used.

Next door

Wynnefield, Philadelphia

1925

Brick rowhome, clay-tile liner

Just over City Line · Oct 2026

The kind of liner damage we expect in eastern Delco

From the report

Flue linerGaps between tiles
FlueCracked tile
CrownCracked

A 1925 brick rowhome a few blocks from the Delaware County line had open joints and a cracked tile in its clay liner, plus a cracked crown. Upper Darby, Yeadon and Drexel Hill are full of chimneys built the same way in the same decade. See the Philadelphia reports.

Next door

Narberth, Montgomery County

1921

Stucco-clad chimney, clay liner

Just over the county line · Oct 2026

Open liner joints behind a stained stucco chimney

From the report

Flue linerGaps, several locations
StuccoStaining
Spark arrestorMissing

A 1921 Narberth home, the same era as much of Havertown and Lansdowne, had gaps in its liner, stucco staining and no spark arrestor. See the Montgomery County reports.

Findings are taken from ValueGuard Level 2 chimney reports. Addresses are withheld. See a sample report.

✦✦✦

II. Why Delaware County chimneys are different

Brick twins, Victorians and factory fireplaces.

What we look hardest at depends on which kind of Delco house it is.

1920s brick twins and rows

Upper Darby, Drexel Hill, Havertown and Yeadon have thousands of chimneys with clay-tile liners now close to 100 years old. Open joints and cracked tiles are the main concern, and many twins share a stack with the house next door.

Victorians and stone singles

Lansdowne, Media, Swarthmore and Wallingford homes often have tall stacks with several flues and a lot of roof flashing. One cracked crown on a multi-flue chimney affects every flue under it.

Factory-built fireplaces

Newtown Square, Broomall, Garnet Valley and Glen Mills homes from the 1970s on often have prefabricated fireplaces with metal flues. Firebox panels, the metal flue and the chase cover on top are what wear out, as our Newtown Square report showed.

Furnaces and water heaters on old flues

Many Delco homes still vent a gas or oil furnace or a water heater through the masonry chimney. When equipment changes, the liner may no longer be the right size, and NFPA 211 calls for a Level 2 after a change of appliance or fuel.

✦✦✦

III. What a Level 2 covers

From the cap to the hearth.

A Level 2 examines every accessible part of the chimney system, masonry or factory-built, and records the inside of the flue on video.

✓Video camera scan of the full flue interior, saved to your report
✓Flue liner condition: cracked tiles, open joints, gaps, offsets and mortar slag
✓Crown, cap, spark arrestor, exterior masonry or stucco and roof flashing
✓The chimney in accessible attics, basements and crawlspaces
✓Clearances to combustible framing, trim and insulation
✓Firebox, damper, smoke chamber, hearth and hearth extension
✓Creosote and soot buildup, blockages and debris
✓Connector pipes for stoves, inserts, furnaces and water heaters
Level 1Level 2 · ValueGuardLevel 3
WhenAnnual check, nothing changedSale or transfer, appliance or fuel change, after a chimney fire or stormSerious hidden damage suspected
Flue video scanNoYes, full lengthYes
Attics, basements, clearancesNoYes, where accessibleYes
Removes masonry or wallsNoNoYes

NFPA 211 is the national standard for chimneys, fireplaces and vents. A standard home inspection is not a Level 1, 2 or 3 chimney inspection: the home inspector reports on what is visible, while a Level 2 is a dedicated chimney evaluation with a camera inside the flue. If the scan shows damage that can only be confirmed by opening the structure, the report says so and recommends a Level 3 by a chimney contractor.

✦✦✦

Pricing

One price, set before we arrive.

The same price anywhere in Delaware County, from a Drexel Hill twin to a Newtown Square colonial.

$329

First chimney

$175

Each additional chimney, same property and visit

$504

Example: a house with two chimneys

Not sure how many chimneys you have? Tell us when you book and we’ll confirm the price before the visit. See all ValueGuard pricing.

✦✦✦

Your chimney inspector

Meet Tyler Gilger.

Tyler Gilger, CSIA Level 2 chimney inspector and VP of Field Operations at ValueGuard

VP, Field Operations · CSIA Level 2 chimney inspector

Every ValueGuard Level 2 chimney inspection is performed by Tyler, our Vice President of Field Operations, who completed CSIA training at the Chimney Safety Institute of America’s Technology Center. With more than 2,500 home inspections behind him, plus thermography, sewer scope and FAA drone certifications, he knows how a chimney fits into the rest of the house.

Read Tyler’s full bio →
Tyler Gilger feeding the inspection camera up the flue from the firebox during a Level 2 chimney inspection
Feeding the camera up through the damper to scan the full flue.
Tyler Gilger setting up at a fireplace with his flue inspection rods during a ValueGuard Level 2 chimney inspection
Drop cloths down, rods and camera ready before the flue scan.

✦✦✦

IV. How it works

Three steps, one visit.

1

Schedule

Book online or call (215) 860-3150. Tell us how many chimneys, what each one serves, and whether it’s shared with a neighbor. Please don’t use the fireplace or stove for 24 hours before the visit.

2

On-site inspection

Tyler examines the chimney inside and out, checks the attic and basement, and runs a camera through the full length of the flue.

3

Your report

A clear report with photos and flue video is emailed to you and your agent by the next business day.

✦✦✦

V. Across Delaware County

From Havertown to Garnet Valley.

We inspect chimneys anywhere in Delaware County, usually during the same visit as the home inspection: Havertown, Drexel Hill, Upper Darby, Lansdowne, Springfield, Broomall, Media, Wallingford, Swarthmore, Newtown Square, Garnet Valley, Aston and Chadds Ford.

Chimney inspections in other counties: Philadelphia · Montgomery County · Chester County · Bucks County

✦✦✦

VI. Questions we get

Delaware County chimney inspections, answered.

How much does a chimney inspection cost in Delaware County?+
A ValueGuard Level 2 chimney inspection is $329 for the first chimney and $175 for each additional chimney on the same property, inspected in the same visit. The price is confirmed before we arrive, and it’s the same whether you add it to your home inspection or book it on its own.
Do you inspect factory-built (prefab) fireplaces?+
Yes. A Level 2 covers masonry chimneys and factory-built fireplaces with metal flues, as well as connector pipes for stoves, inserts, furnaces and water heaters. Our recent Newtown Square report was a 1994 fireplace with a metal liner and cracked firebox panels.
Our twin shares a chimney with the house next door. What do you inspect?+
We inspect the flues and appliances that serve your side of the house, and report on everything we can see of the shared stack, including the crown, cap and flashing. We can’t enter the neighbor’s house or operate their equipment, and the report notes that limitation.
Does a standard home inspection include the chimney?+
A home inspection reports on the visible parts of the chimney: the exterior, crown and flashing where the roof is accessible, and the firebox and damper. It doesn’t include a camera scan of the flue. A Level 2 is a separate, dedicated chimney evaluation you can add to your home inspection.
When will I get the report?+
The report, with photos and flue video, is emailed to you and your agent by the next business day, so it fits inside a normal inspection-contingency period.
Do you sweep or repair chimneys?+
No. ValueGuard is inspection-only. We don’t sweep, reline, rebuild or repair chimneys, so there’s no reason for us to find work that isn’t there. The report tells you what was found and what kind of professional to call.

Buying in Delaware County?

See inside the chimney before you sign.

Level 2 chimney inspection from $329 · add it to any ValueGuard home inspection or book it on its own

Schedule Level 2 — $329Ask a question

or call (215) 860-3150

ValueGuard Home Inspections · 100 E Penn Square, Suite 400, Philadelphia, PA 19107 · (215) 860-3150 · Mon–Fri 8:30am–5:00pm, Sat 9:00am–4:00pm