Montgomery County, PA · Level 2 chimney inspection

Chimney Inspection in Montgomery County

Montgomery County has two kinds of chimneys: Main Line stone and stucco stacks from the early 1900s, and the stucco-clad chimneys on 1980s and ’90s homes in Blue Bell, Horsham and Lansdale. Both age in ways you can’t see from the driveway. A ValueGuard Level 2 puts a camera through the whole flue and checks the chimney from the cap to the hearth.

The findings on this page come from recent ValueGuard Level 2 chimney reports in Montgomery County (Narberth and Blue Bell).

Montgomery County Level 2 chimney inspection at a glance

✓
From $329First chimney · $175 each additional on the same property
✓
CSIA-certified inspectorTyler Gilger, trained at the CSIA Technology Center
✓
Full video flue scanEvery joint, top to bottom, saved to your report
✓
Inspection onlyWe don’t sweep, reline or rebuild chimneys
✓
Since 199794,000+ inspections · 4.9★ on Google

The short answer

Cost$329 for the first chimney, $175 for each additional chimney on the same property. Price confirmed before the visit.
What you getA photo- and video-documented report on the flue, crown, cap, flashing, firebox, damper, smoke chamber and clearances, emailed to you and your agent by the next business day.
What we find most in Montgomery CountyOpen joints in original clay liners in pre-war Main Line homes; cracked crowns, mortar slag and worn firebox brick in 1980s–90s homes.
Who should bookBuyers of any Montgomery County home with a fireplace, wood stove or insert, and anyone converting a fireplace or changing fuel.
Service areaAll of Montgomery County: Lower Merion and the Main Line, Cheltenham, Abington, Blue Bell, Horsham, Lansdale, Conshohocken, Collegeville and Pottstown.

✦✦✦

Quick answer

Should I get a Level 2 chimney inspection when buying a home in Montgomery County?

Yes, if the home has a fireplace, wood stove or insert you plan to use. NFPA 211 calls for a Level 2 inspection when a property is sold or transferred, because a basic visual check can’t see inside the flue. Recent ValueGuard Level 2 inspections in Montgomery County have found open joints in a 1921 Narberth liner, a cracked crown on a 1986 Blue Bell townhouse, and mortar slag in a 1990 Blue Bell flue. ValueGuard’s Level 2 is $329 for the first chimney and $175 for each additional chimney.

✦✦✦

A lot of Montgomery County’s housing was built around the fireplace. Lower Merion and Cheltenham homes from the 1910s and ’20s often have two or three fireplaces sharing one stack, and the 1980s–90s subdivisions in Whitpain, Horsham and Montgomery Township put a fireplace in nearly every family room. Those chimneys are now 35 to 110 years old, and the parts that wear out first are the ones you can’t see from the ground.

✦✦✦

I. Real findings from recent reports

What the camera actually found.

Three recent Montgomery County Level 2 inspections: one pre-war Main Line home and two Blue Bell homes from the late 1980s.

Flue video scan showing gaps in the clay liner of a 1921 Narberth chimneyFlue damage

Narberth · Oct 2026

A 1921 home with open liner joints and a stained stucco chimney

From the report

Flue linerGaps, several locations
Spark arrestorMissing
StuccoStaining (possible moisture)
FireboxMortar deterioration
Ash dumpFull

The camera found gaps in the clay liner in more than one place. Outside, staining on the stucco suggested water getting into the chimney, and there was no spark arrestor or screen on top. Inside, the firebox mortar had broken down. This was a standalone Level 2, booked on its own.

Cracked concrete crown on a stucco chimney at a 1986 Blue Bell townhouse in Montgomery CountyCracked crown

Blue Bell · Oct 2026

A 1986 townhouse with a cracked crown

From the report

CrownCracked
ChimneyStucco-clad, clay liner

The crown is the concrete cap that sheds water off the top of the chimney. Once it cracks, water gets into the stucco and the masonry beneath it, and freeze-thaw cycles widen the crack every winter. It’s usually a much smaller repair than the water damage it prevents.

Inside the flue

Built

1990

Blue Bell single-family home

Blue Bell · Nov 2026

Mortar slag in the flue and a damaged bedroom firebox

From the report

Flue linerExcess mortar slag
Bedroom fireplaceDamaged firebox brick

Mortar that squeezed into the flue when the liner was built narrows the passage and catches creosote. The second-floor bedroom fireplace had damaged firebox brick, which should be repaired before that fireplace is used.

Findings are taken from ValueGuard Level 2 chimney reports. Addresses are withheld. See a sample report.

More from the Montgomery County reports

Stucco-clad chimney with staining and no spark arrestor on a Narberth roof
Narberth: staining on the stucco and no spark arrestor on top. The outside clues; the camera showed the liner gaps inside.

✦✦✦

II. Why Montgomery County chimneys are different

Stone, stucco and tall trees.

The conditions behind most of what we find in Montgomery County chimneys.

Pre-war Main Line chimneys

Homes in Lower Merion, Narberth and Cheltenham from the 1900s–1930s often have several fireplaces on one stack and their original clay liners. Those liners are where we found open joints.

Stucco hides water

Stucco over masonry hides cracks and moisture. Staining, a cracked crown or a missing cap are the outside clues; the camera shows what’s happening inside.

Fireplaces turning 35 to 40

Blue Bell, Horsham and Lansdale subdivisions are full of late-1980s and ’90s fireplaces. Crowns, firebox brick and flue mortar are wearing out on that schedule, as our Blue Bell reports showed.

Mature trees

Heavy tree cover drops leaves into flues and invites squirrels and birds. A cap with a screen matters more here, and the Narberth chimney we inspected had none.

✦✦✦

III. What a Level 2 covers

From the cap to the hearth.

A Level 2 examines every accessible part of the chimney system and records the inside of the flue on video, including where the chimney passes through the attic and basement.

✓Video camera scan of the full flue interior, saved to your report
✓Flue liner condition: cracked tiles, open joints, gaps, offsets and mortar slag
✓Crown, cap, spark arrestor, exterior masonry or stucco and roof flashing
✓The chimney in accessible attics, basements and crawlspaces
✓Clearances to combustible framing, trim and insulation
✓Firebox, damper, smoke chamber, hearth and hearth extension
✓Creosote and soot buildup, blockages and debris
✓Connector pipes for stoves, inserts, furnaces and water heaters
Level 1Level 2 · ValueGuardLevel 3
WhenAnnual check, nothing changedSale or transfer, appliance or fuel change, after a chimney fire or stormSerious hidden damage suspected
Flue video scanNoYes, full lengthYes
Attics, basements, clearancesNoYes, where accessibleYes
Removes masonry or wallsNoNoYes

NFPA 211 is the national standard for chimneys, fireplaces and vents. A standard home inspection is not a Level 1, 2 or 3 chimney inspection: the home inspector reports on what is visible, while a Level 2 is a dedicated chimney evaluation with a camera inside the flue. If the scan shows damage that can only be confirmed by opening the structure, the report says so and recommends a Level 3 by a chimney contractor.

✦✦✦

Pricing

One price, set before we arrive.

The same price anywhere in Montgomery County. A Main Line home with several chimneys is priced per chimney, and we confirm the total before the visit.

$329

First chimney

$175

Each additional chimney, same property and visit

$504

Example: a house with two chimneys

Not sure how many chimneys you have? Tell us when you book and we’ll confirm the price before the visit. See all ValueGuard pricing.

✦✦✦

Your chimney inspector

Meet Tyler Gilger.

Tyler Gilger, CSIA Level 2 chimney inspector and VP of Field Operations at ValueGuard

VP, Field Operations · CSIA Level 2 chimney inspector

Every ValueGuard Level 2 chimney inspection is performed by Tyler, our Vice President of Field Operations, who completed CSIA training at the Chimney Safety Institute of America’s Technology Center. With more than 2,500 home inspections behind him, plus thermography, sewer scope and FAA drone certifications, he knows how a chimney fits into the rest of the house.

Read Tyler’s full bio →
ValueGuard chimney inspector Tyler Gilger inspecting the firebox and damper during a Level 2 chimney inspection
Checking the firebox, damper and smoke chamber from below.
Rooftop view of a chimney crown and metal flue top during a ValueGuard Level 2 chimney inspection
Up top: crown, flue and cap, with the scan run from the roof as well.

✦✦✦

IV. How it works

Three steps, one visit.

1

Schedule

Book online or call (215) 860-3150. Tell us how many chimneys and what’s connected to each: fireplace, insert, stove or furnace. Please don’t use the fireplace or stove for 24 hours before the visit.

2

On-site inspection

Tyler examines the chimney inside and out, checks the attic and basement, and runs a camera through the full length of the flue.

3

Your report

A clear report with photos and flue video is emailed to you and your agent by the next business day.

✦✦✦

V. Across Montgomery County

From the Main Line to Pottstown.

Recent Montgomery County Level 2 reports have come from Narberth and Blue Bell. We inspect chimneys anywhere in the county, usually during the same visit as the home inspection.

Chimney inspections in other counties: Philadelphia · Delaware County · Chester County · Bucks County

✦✦✦

VI. Questions we get

Montgomery County chimney inspections, answered.

How much does a chimney inspection cost in Montgomery County?+
A ValueGuard Level 2 chimney inspection is $329 for the first chimney and $175 for each additional chimney on the same property, inspected in the same visit. The price is confirmed before we arrive, and it’s the same whether you add it to your home inspection or book it on its own.
The house has several fireplaces. How is that priced?+
Pricing is per chimney: $329 for the first and $175 for each additional chimney on the property. Older Main Line homes often have several fireplaces venting through one or two chimneys. Tell us what you see when you book and we’ll confirm the price before the visit.
What’s the difference between a Level 1 and a Level 2 chimney inspection?+
A Level 1 is a visual check of the readily accessible parts of the chimney, meant for a chimney in continued use with nothing changed. A Level 2 adds a video camera scan of the entire flue and an inspection of the chimney in accessible attics, basements and crawlspaces, including clearances to framing. NFPA 211 calls for a Level 2 on sale or transfer of a property.
Is a stucco chimney a problem?+
Not by itself, but stucco hides what’s underneath. We look for cracks, staining and loose areas in the stucco, check the crown, cap and flashing, and scan the flue on camera. On our Narberth inspection, stucco staining outside lined up with gaps in the liner inside.
Can I book a chimney inspection without a home inspection?+
Yes. Our Narberth Level 2 was booked on its own. Most buyers add it to their ValueGuard home inspection so everything is done in one visit and on the same inspection-contingency timeline.
Do you sweep or repair chimneys?+
No. ValueGuard is inspection-only. We don’t sweep, reline, rebuild or repair chimneys, so there’s no reason for us to find work that isn’t there. The report tells you what was found and what kind of professional to call.

Buying in Montgomery County?

See inside the chimney before you sign.

Level 2 chimney inspection from $329 · add it to any ValueGuard home inspection or book it on its own

Schedule Level 2 — $329Ask a question

or call (215) 860-3150

ValueGuard Home Inspections · 100 E Penn Square, Suite 400, Philadelphia, PA 19107 · (215) 860-3150 · Mon–Fri 8:30am–5:00pm, Sat 9:00am–4:00pm