The short answer
✦✦✦
Quick answer
Do I need a Level 2 chimney inspection when buying a house in Philadelphia?
If the house has a working fireplace, a wood or coal stove, or a masonry chimney that still vents the furnace or water heater, yes. NFPA 211, the national chimney standard, calls for a Level 2 inspection whenever a property is sold or transferred. A standard home inspection only looks at what’s visible from the roof and the firebox; a Level 2 adds a camera scan of the entire flue. Recent ValueGuard Level 2 inspections in Philadelphia have found open joints, cracked tiles and a liner that needed replacing, none of it visible from the roof. ValueGuard charges $329 for the first chimney and $175 for each additional chimney.
✦✦✦
Most Philadelphia chimneys were built for coal. In the century since, they’ve been converted to oil and then gas, had flues abandoned or capped, and been buried behind roof decks, parapets and new rubber roofs. That history is why the inside of the flue matters more here than almost anywhere else in the region, and why a camera tells you far more than a look from the roof.
✦✦✦
I. Real findings from recent reports
What the camera actually found.
Four recent Philadelphia Level 2 inspections. The pattern: the outside of a city chimney tells you something, but the liner tells you more.
Findings are taken from ValueGuard Level 2 chimney reports. Addresses are withheld. See a sample report.
More from the Philadelphia reports
✦✦✦
II. Why Philadelphia chimneys are different
Party walls, flat roofs and coal-era flues.
These are the conditions behind most of what we find in city chimneys.
Many rowhome chimneys were built for coal and now vent a gas furnace or water heater. When a high-efficiency system replaces the old one, the clay flue can be left oversized or serving only the water heater, which is when condensation starts working on the liner.
Rowhome and twin chimneys often run inside a shared wall. A gap in the liner can push smoke or exhaust toward the framing, and you’d never see it from either side of the wall.
Rubber roofs, parapets and decks hide the base of the chimney and make the crown hard to reach. A leaning stack and eroded mortar at the roof line were among our Philadelphia findings.
Plenty of city fireplaces were closed off decades ago and reopened as a selling point. A fireplace nobody has lit in years needs a look inside before anyone does.
✦✦✦
III. What a Level 2 covers
From the cap to the hearth.
A Level 2 examines every accessible part of the chimney system and records the inside of the flue on video. In a rowhome, that includes the chimney where it passes through the attic or crawl space under a flat roof.
| Level 1 | Level 2 · ValueGuard | Level 3 | |
|---|---|---|---|
| When | Annual check, nothing changed | Sale or transfer, appliance or fuel change, after a chimney fire or storm | Serious hidden damage suspected |
| Flue video scan | No | Yes, full length | Yes |
| Attics, basements, clearances | No | Yes, where accessible | Yes |
| Removes masonry or walls | No | No | Yes |
NFPA 211 is the national standard for chimneys, fireplaces and vents. A standard home inspection is not a Level 1, 2 or 3 chimney inspection: the home inspector reports on what is visible, while a Level 2 is a dedicated chimney evaluation with a camera inside the flue. If the scan shows damage that can only be confirmed by opening the structure, the report says so and recommends a Level 3 by a chimney contractor.
✦✦✦
Pricing
One price, set before we arrive.
The same price everywhere in Philadelphia, whether it’s a Fishtown trinity or a Chestnut Hill stone single with four fireplaces.
$329
First chimney
$175
Each additional chimney, same property and visit
$504
Example: a house with two chimneys
Not sure how many chimneys you have? Tell us when you book and we’ll confirm the price before the visit. See all ValueGuard pricing.
✦✦✦
Your chimney inspector
Meet Tyler Gilger.

VP, Field Operations · CSIA Level 2 chimney inspector
Every ValueGuard Level 2 chimney inspection is performed by Tyler, our Vice President of Field Operations, who completed CSIA training at the Chimney Safety Institute of America’s Technology Center. With more than 2,500 home inspections behind him, plus thermography, sewer scope and FAA drone certifications, he knows how a chimney fits into the rest of the house.
Read Tyler’s full bio →✦✦✦
IV. How it works
Three steps, one visit.
1
ScheduleBook online or call (215) 860-3150. Tell us how many chimneys, what they serve, and how the roof is reached (hatch, deck or ladder). Please don’t use the fireplace or stove for 24 hours before the visit.
2
On-site inspectionTyler examines the chimney inside and out, checks the attic or crawl space, and runs a camera through the full length of the flue.
3
Your reportA clear report with photos and flue video is emailed to you and your agent by the next business day.
✦✦✦
V. Across Philadelphia
From Queen Village to the Northeast.
Recent Philadelphia Level 2 reports have come from Queen Village, Wynnefield, Mt. Airy and West Oak Lane. We inspect chimneys in every neighborhood in the city, usually during the same visit as the home inspection.
Chimney inspections in other counties: Montgomery County · Delaware County · Chester County · Bucks County
✦✦✦
VI. Questions we get
Philadelphia chimney inspections, answered.
How much does a chimney inspection cost in Philadelphia?+
Does a Philadelphia home inspection include the chimney?+
The fireplace is sealed. Do I still need a Level 2?+
Can you inspect a chimney on a flat roof or behind a roof deck?+
What if the house has more than one chimney?+
Do you sweep or repair chimneys?+
Buying in Philadelphia?
See inside the chimney before you settle.
Level 2 chimney inspection from $329 · add it to any ValueGuard home inspection or book it on its own
Schedule Level 2 — $329Ask a questionor call (215) 860-3150
ValueGuard Home Inspections · 100 E Penn Square, Suite 400, Philadelphia, PA 19107 · (215) 860-3150 · Mon–Fri 8:30am–5:00pm, Sat 9:00am–4:00pm
Related services





