Bucks County, PA · Level 2 chimney inspection

Chimney Inspection in Bucks County

Bucks County chimneys range from lower Bucks homes built for oil heat to stone farmhouse fireplaces around Doylestown and New Hope and the 1980s colonials of Chalfont and Newtown. A lot of them still burn real wood every winter. A ValueGuard Level 2 chimney inspection scans the whole flue on camera and checks everything from the cap to the hearth.

The findings on this page come from recent ValueGuard Level 2 chimney reports in Bucks County (Eddington and Chalfont).

Bucks County Level 2 chimney inspection at a glance

✓
From $329First chimney · $175 each additional on the same property
✓
CSIA-certified inspectorTyler Gilger, trained at the CSIA Technology Center
✓
Full video flue scanEvery joint, top to bottom, saved to your report
✓
Inspection onlyWe don’t sweep, reline or rebuild chimneys
✓
Since 199794,000+ inspections · 4.9★ on Google

The short answer

Cost$329 for the first chimney, $175 for each additional chimney on the same property. Price confirmed before the visit.
What you getA photo- and video-documented report on the flue, crown, cap, flashing, firebox, damper, smoke chamber and clearances, emailed to you and your agent by the next business day.
What we find most in Bucks CountyFireboxes that need work before the next fire: cracked firebox panels and cracked brick above the firebox. One chimney also had a dented stainless liner and a cracked crown.
Who should bookBuyers of any Bucks County home with a fireplace, wood stove or insert, and owners who burn wood regularly or have changed heating fuel.
Service areaAll of Bucks County: Bensalem, Levittown, Bristol, Langhorne, Newtown, Yardley, Warminster, Warrington, Chalfont, Doylestown, New Hope and Quakertown.

✦✦✦

Quick answer

Do I need a Level 2 chimney inspection when buying a home in Bucks County?

If the home has a fireplace, wood stove or insert you plan to use, yes. NFPA 211 calls for a Level 2 inspection whenever a property is sold or transferred, because a basic look from the roof and the firebox can’t see inside the flue. Recent ValueGuard Level 2 inspections in Bucks County found problems to fix before the next fire: an Eddington chimney with a dented stainless liner, a cracked crown and cracked firebox panels, and a 1989 Chalfont fireplace with cracked masonry and a rough smoke chamber. ValueGuard’s Level 2 is $329 for the first chimney and $175 for each additional chimney.

✦✦✦

Bucks County burns more wood than the rest of our service area. Upper and central Bucks have farmhouses with big fireplaces and stoves that get used all winter, lower Bucks has post-war homes with chimneys built for oil furnaces, and the 1980s–90s builder homes in Chalfont, Newtown and Warrington are reaching the age where fireboxes and crowns start to give out. Regular wood burning means creosote, and creosote means the inside of the flue matters.

✦✦✦

I. Real findings from recent reports

What the camera actually found.

Two recent Bucks County Level 2 inspections: a standalone chimney inspection in Eddington and a 1989 home in Chalfont.

Camera view inside a dented, damaged stainless steel flue liner in Eddington, Bucks CountyFlue damage

Eddington · Nov 2026

A dented stainless liner inside and a cracked crown on top

From the report

FlueDented / damaged metal liner
CrownCracked
FlueSweeping advised
FireboxCracked panels
FireplaceClean before use

The camera found the stainless liner dented and damaged partway down, which you can’t see from the roof or the firebox. Up top, the crown around the liner was cracked. Below, the firebox panels were cracked and there was enough creosote to call for sweeping before any fire. This was a standalone Level 2, booked on its own.

Cracked brick and mortar above the firebox of a 1989 Chalfont fireplace in Bucks CountyFirebox

Chalfont · Oct 2026

A 1989 fireplace showing signs of settlement

From the report

Masonry above fireboxCracked (possible settlement)
FireplaceCracking inside
Smoke chamberRough surface

Cracks in the brick above the firebox and inside the fireplace pointed to settlement. The smoke chamber, the funnel between the firebox and the flue, was rough rather than smooth, which disrupts draft and holds creosote. Tyler recommended evaluation and repair before the fireplace is used.

Findings are taken from ValueGuard Level 2 chimney reports. Addresses are withheld. See a sample report.

More from the Bucks County reports

Cracked crown around a stainless flue liner and cap on an Eddington chimney in Bucks County
Eddington: the cracked crown around the liner and cap at the top of the chimney.

✦✦✦

II. Why Bucks County chimneys are different

Oil-era homes, farmhouses and real wood fires.

The conditions behind most of what we look for in Bucks County chimneys.

Lower Bucks, built for oil

Many 1950s and ’60s homes in Levittown, Bristol, Bensalem and Croydon were built with a chimney for an oil furnace. Conversions to gas or high-efficiency equipment can leave the liner the wrong size for what it vents.

Stone farmhouses

Doylestown, New Hope, Solebury and the upper county have stone homes with large fireplaces, older liners and stoves added over the years. Clearances to old framing get close attention.

1980s–90s builder homes

Chalfont, Newtown, Warrington and Yardley fireplaces are now 30 to 40 years old. Firebox brick, smoke chambers and crowns are wearing out on that schedule, as our Chalfont report showed.

Wood that actually gets burned

Bucks homeowners burn more real wood than most of our region, and wood smoke leaves creosote. Sweeping was advised on our Eddington chimney before its next fire.

✦✦✦

III. What a Level 2 covers

From the cap to the hearth.

A Level 2 examines every accessible part of the chimney system, masonry or metal-lined, and records the inside of the flue on video.

✓Video camera scan of the full flue interior, saved to your report
✓Flue liner condition: cracked tiles, open joints, gaps, offsets and mortar slag
✓Crown, cap, spark arrestor, exterior masonry or stucco and roof flashing
✓The chimney in accessible attics, basements and crawlspaces
✓Clearances to combustible framing, trim and insulation
✓Firebox, damper, smoke chamber, hearth and hearth extension
✓Creosote and soot buildup, blockages and debris
✓Connector pipes for stoves, inserts, furnaces and water heaters
Level 1Level 2 · ValueGuardLevel 3
WhenAnnual check, nothing changedSale or transfer, appliance or fuel change, after a chimney fire or stormSerious hidden damage suspected
Flue video scanNoYes, full lengthYes
Attics, basements, clearancesNoYes, where accessibleYes
Removes masonry or wallsNoNoYes

NFPA 211 is the national standard for chimneys, fireplaces and vents. A standard home inspection is not a Level 1, 2 or 3 chimney inspection: the home inspector reports on what is visible, while a Level 2 is a dedicated chimney evaluation with a camera inside the flue. If the scan shows damage that can only be confirmed by opening the structure, the report says so and recommends a Level 3 by a chimney contractor.

✦✦✦

Pricing

One price, set before we arrive.

The same price anywhere in Bucks County, from a Levittown ranch to a Solebury farmhouse.

$329

First chimney

$175

Each additional chimney, same property and visit

$504

Example: a house with two chimneys

Not sure how many chimneys you have? Tell us when you book and we’ll confirm the price before the visit. See all ValueGuard pricing.

✦✦✦

Your chimney inspector

Meet Tyler Gilger.

Tyler Gilger, CSIA Level 2 chimney inspector and VP of Field Operations at ValueGuard

VP, Field Operations · CSIA Level 2 chimney inspector

Every ValueGuard Level 2 chimney inspection is performed by Tyler, our Vice President of Field Operations, who completed CSIA training at the Chimney Safety Institute of America’s Technology Center. With more than 2,500 home inspections behind him, plus thermography, sewer scope and FAA drone certifications, he knows how a chimney fits into the rest of the house.

Read Tyler’s full bio →
Tyler Gilger setting up at a fireplace with his flue inspection rods during a ValueGuard Level 2 chimney inspection
Drop cloths down, rods and camera ready before the flue scan.
ValueGuard chimney inspector Tyler Gilger inspecting the firebox and damper during a Level 2 chimney inspection
Checking the firebox, damper and smoke chamber from below.

✦✦✦

IV. How it works

Three steps, one visit.

1

Schedule

Book online or call (215) 860-3150. Tell us how many chimneys and what’s connected to each: fireplace, wood stove, insert or furnace. Please don’t use the fireplace or stove for 24 hours before the visit.

2

On-site inspection

Tyler examines the chimney inside and out, checks the attic and basement, and runs a camera through the full length of the flue.

3

Your report

A clear report with photos and flue video is emailed to you and your agent by the next business day.

✦✦✦

V. Across Bucks County

From Bensalem to Quakertown.

Recent Bucks County Level 2 reports have come from Eddington and Chalfont. We inspect chimneys anywhere in the county, usually during the same visit as the home inspection.

Chimney inspections in other counties: Philadelphia · Montgomery County · Delaware County · Chester County

✦✦✦

VI. Questions we get

Bucks County chimney inspections, answered.

How much does a chimney inspection cost in Bucks County?+
A ValueGuard Level 2 chimney inspection is $329 for the first chimney and $175 for each additional chimney on the same property, inspected in the same visit. The price is confirmed before we arrive, and it’s the same whether you add it to your home inspection or book it on its own.
Can I book a chimney inspection without a home inspection?+
Yes. Our Eddington Level 2 was booked on its own. Most buyers add it to their ValueGuard home inspection so everything happens in one visit and on the same inspection-contingency timeline.
We burn wood every winter. How often should the chimney be inspected?+
NFPA 211 calls for chimneys to be inspected every year, with sweeping as needed. A yearly check on a chimney that hasn’t changed is a Level 1. A Level 2 is the right inspection when you buy or sell the house, change the stove, insert or fuel, or after a chimney fire.
Do you inspect metal-lined and factory-built chimneys?+
Yes. A Level 2 covers masonry chimneys with clay liners, chimneys relined with stainless steel, and factory-built fireplaces with metal flues, plus connector pipes for stoves and inserts. Our Eddington report found a dented stainless liner on camera.
Does a standard home inspection include the chimney?+
A home inspection reports on the visible parts of the chimney: the exterior, crown and flashing where the roof is accessible, and the firebox and damper. It doesn’t include a camera scan of the flue. A Level 2 is a separate chimney evaluation you can add to your home inspection.
Do you sweep or repair chimneys?+
No. ValueGuard is inspection-only. We don’t sweep, reline, rebuild or repair chimneys, so there’s no reason for us to find work that isn’t there. The report tells you what was found and what kind of professional to call.

Buying in Bucks County?

See inside the chimney before you sign.

Level 2 chimney inspection from $329 · add it to any ValueGuard home inspection or book it on its own

Schedule Level 2 — $329Ask a question

or call (215) 860-3150

ValueGuard Home Inspections · 100 E Penn Square, Suite 400, Philadelphia, PA 19107 · (215) 860-3150 · Mon–Fri 8:30am–5:00pm, Sat 9:00am–4:00pm