Radon testing · Delaware County, PA

Radon Testing in Delaware County, PA

Radon in Delaware County splits sharply by town. Main Line and western Delco homes test high far more often than the eastern boroughs. Here is what 3,556 of our Delco radon tests show.

$190 · 2-day test (48-hour minimum) · PA DEP-certified radon tester

Odds of a 4.0+ result in Delaware County
1 in 5
homes we tested (20.6% of 3,556)
U.S. average (EPA estimate)1 in 15
From our case files

Delco’s highest readings came from the Main Line and Media

Our three highest Delaware County results, from Radnor, Media and Wayne, were each more than 30 times the EPA action level. The eastern boroughs rarely test that high, but the western side of the county regularly does.

233.1 pCi/L
58× the EPA action level
Radnor
Detached home · April 2018
192.5 pCi/L
48× the EPA action level
Media
Detached home · April 2014
127.0 pCi/L
32× the EPA action level
Wayne
Detached home · March 2017
The data

What 3,556 Delaware County radon tests tell us

Across Delco, 20.6% of homes we tested were at or above 4.0 pCi/L, about 1 in 5, with a median of 2.0 pCi/L. Another 29.7% fell between 2.0 and 3.9.

The county average hides two very different patterns. In Wayne, Media, Glen Mills, Springfield and the Haverford Township communities, 23% to 30% of homes test 4.0+. In Glenolden, Collingdale, Darby and Brookhaven, it is 6% or less. Our highest Delco reading, 233.1 pCi/L, came from a detached home in Radnor, and a Media home reached 192.5.

How Delaware County results break down

Share of 3,556 homes in each result range

Under 2.0 pCi/L: 49.7%
2.0–3.9 pCi/L: 29.7%
4.0–9.9 pCi/L: 17.7%
10–19.9 pCi/L: 2.2%
20+ pCi/L: 0.7%

Share of homes at 4.0+ pCi/L, by county

ValueGuard tests, 2012–2026, vs. EPA national estimate

Chester County
28.4%
Bucks County
26.3%
Montgomery County
26.1%
Delaware County
20.6%
Philadelphia
9.1%
U.S. (EPA estimate)
6.7%
Look up your area

Delaware County radon results by town

We have tested enough homes to report on 35 Delco towns, more than any other county we serve. Wayne, Media, Glen Mills, Wynnewood and Springfield lead. The eastern boroughs along the Philadelphia line and the I-95 corridor sit at the bottom of the list.

At or below U.S. average1–2× U.S. average2–4× U.S. averageMore than 4× U.S. average
Delaware County average (20.6%)U.S. average, EPA estimate (6.7%) · Bar length runs from 0 to 60%. Colors compare each area with the U.S. average.
TownHomes testedMedianShare of homes at 4.0+ pCi/L
Wayne2072.4
30.4%1 in 3.3
Media2512.3
29.1%1 in 3.4
Glen Mills572.3
28.1%1 in 3.6
Wynnewood1382.4
26.8%1 in 3.7
Springfield1802.6
26.7%1 in 3.7
Haverford522.5
25.0%1 in 4
Lansdowne1462.1
24.7%1 in 4
Newtown Square1692.1
24.3%1 in 4.1
Havertown3112.0
23.5%1 in 4.3
Garnet Valley512.4
23.5%1 in 4.3
Upper Chichester (small sample)262.0
23.1%1 in 4.3
Morton542.5
22.2%1 in 5
Broomall992.7
22.2%1 in 5
Chadds Ford (small sample)291.8
20.7%1 in 5
Swarthmore771.9
19.5%1 in 5
Bryn Mawr1552.3
18.7%1 in 5
Woodlyn (small sample)271.5
18.5%1 in 5
Drexel Hill2422.0
18.2%1 in 5
Ardmore1161.9
18.1%1 in 6
Prospect Park (small sample)341.4
17.6%1 in 6
Secane (small sample)291.1
17.2%1 in 6
Aldan (small sample)412.0
17.1%1 in 6
Aston711.4
16.9%1 in 6
Folsom541.4
16.7%1 in 6
Wallingford1152.3
16.5%1 in 6
Villanova (small sample)451.9
15.6%1 in 6
Ridley Park591.2
11.9%1 in 8
Clifton Heights671.3
10.4%1 in 10
Upper Darby1001.4
9.0%1 in 11
Norwood (small sample)381.3
7.9%1 in 13
Folcroft (small sample)290.8
6.9%1 in 14
Brookhaven711.4
5.6%1 in 18
Darby (small sample)301.0
3.3%1 in 30
Collingdale (small sample)301.1
3.3%1 in 30
Glenolden611.0
3.3%1 in 30

No match in our table. Areas with fewer than 25 tested homes aren’t listed. Call 215-860-3150 and we’ll tell you what we’ve seen nearby.

Towns are mailing-address names with at least 25 tested homes. Wayne, Bryn Mawr and Wynnewood addresses span county lines; these figures cover the Delaware County side only.

Myth vs. data

Four things Delaware County buyers assume about radon

Myth
“My neighbor tested low, so we’re fine.”
What our data shows

On 37.6% of the 226 streets where we’ve tested three or more homes, at least one came in under 2.0 pCi/L and another came in at 4.0 or higher. Next door is not a forecast.

Myth
“Twins and rowhomes don’t need a test.”
What our data shows

Attached Delco homes do test lower (7.7% at 4.0+) than detached homes (24.5%), but that’s still about 1 in 13.

Detached
24.5%
Attached
7.7%
Myth
“A finished basement keeps radon out.”
What our data shows

18.9% of Delco homes tested in a finished basement were 4.0+, compared with 23.5% in unfinished ones. Close enough that finishing is no substitute for a test.

Unfinished
23.5%
Finished
18.9%
Myth
“A summer test tells you everything.”
What our data shows

Summer and winter both ran lower in Delco (about 18%) than spring and fall (22 to 24%). A summer result in the 3s is worth a long-term retest.

Winter
18.0%
Spring
23.8%
Summer
17.5%
Fall
22.4%

How a ValueGuard radon test works in Delaware County

Pennsylvania requires hired radon testers to be certified by the PA Department of Environmental Protection, and real estate tests follow a specific state protocol. Most of our Delaware County radon tests are placed during the home inspection, so there is one appointment and your result lands inside the contingency period. A ValueGuard radon test is $190 and runs 2 days, with a 48-hour minimum test period.

1
Closed-house conditions start 12 hours early

Windows and exterior doors stay closed (except for normal entry and exit) starting 12 hours before the test and for the whole test. We send the seller or occupant clear instructions in advance.

2
We place the monitor in the lowest livable level

In most Delaware County homes that means the basement, finished or unfinished. The device sits away from drafts, sump pits, and exterior walls, per PA DEP protocol.

3
The test runs a minimum of 48 hours

Short-term real estate tests run at least 48 hours. Anti-tampering measures are used and a non-interference agreement is signed, both required for Pennsylvania real estate radon tests.

4
You get a clear result and what it means

Your report shows the average radon level for the test period and where it falls against the EPA action level, so you and your agent can decide quickly what, if anything, to negotiate.

What your radon result means

Radon is measured in picocuries per liter of air (pCi/L). EPA estimates radon causes about 21,000 lung cancer deaths a year in the U.S. and is the leading cause of lung cancer among non-smokers.

Below 2.0 pCi/L

Low. No action needed, though EPA notes there is no known completely safe level. Retest after major renovations or if you finish the basement.

2.0 – 3.9 pCi/L

Below the action level, but EPA suggests homeowners consider reducing radon in this range. Many buyers use this result to plan a future system or a long-term retest.

4.0 pCi/L or higher

At or above the EPA action level. EPA recommends fixing the home. In a sale, this is usually resolved with a seller-installed mitigation system (with a post-mitigation retest) or a credit.

Why Delaware County buyers and agents choose ValueGuard

Since 1997

Family-owned ASHI inspection company with 94,000+ inspections completed across Southeastern PA.

Designated radon team

A dedicated team handles radon, mold, lead and sewer testing, so your test is placed and retrieved on schedule.

Our own local data

We have tested more than 22,000 homes for radon since 2012, which is where every number on this page comes from.

Rated 4.9 stars

1,400+ Google reviews and BBB accredited. Pair radon with your home inspection in one visit.

Delaware County radon testing FAQs

How much does radon testing cost in Delaware County?

A ValueGuard radon test in Delaware County is $190. The test runs 2 days (a 48-hour minimum under PA DEP protocol) and is performed by a PA DEP-certified radon tester. Most clients add it to their home inspection so the monitor is placed during the same visit.

Is radon a problem in Delaware County, PA?

It depends heavily on the town. 20.6% of Delco homes we tested since 2012 were 4.0 pCi/L or higher, but rates ranged from about 30% in Wayne and 29% in Media to about 3% in Glenolden, Collingdale and Darby.

Which Delaware County towns have the highest radon?

In our data: Wayne (30.4% at 4.0+), Media (29.1%), Glen Mills (28.1%), Wynnewood (26.8%), Springfield (26.7%), and Haverford, Lansdowne, Newtown Square and Havertown in the mid-20s.

Do Delco twins and rowhomes need a radon test?

We still recommend it. Only 7.7% of attached homes we tested in Delco were 4.0+, but that is still about 1 in 13, and the result for any single house cannot be predicted from its neighbors.

How long does a radon test take?

A Pennsylvania real estate radon test runs at least 48 hours under closed-house conditions, which start 12 hours before the test.

What if the radon test is high?

EPA recommends fixing homes at 4.0 pCi/L or above. Buyers typically ask the seller to install a mitigation system by a PA DEP-certified mitigator and provide a retest, or negotiate a credit.

Can you test radon during my home inspection?

Yes. Most clients add radon to their home inspection so the monitor is placed during the same visit.

Book your Delaware County radon test

Add radon testing to your home inspection in Media, Havertown, Springfield, Drexel Hill, Wayne or anywhere in Delco.

About this data: figures come from 3,556 radon tests ValueGuard performed in Delaware County from December 2012 through November 2026. Each home is counted once (its first test), and homes that already had a radon mitigation system are excluded. The U.S. comparison is EPA’s estimate that nearly 1 in 15 homes has radon at or above 4.0 pCi/L. Results from other homes cannot predict the radon level in yours. The only way to know is to test.