Radon Testing in Montgomery County, PA
About 1 in 4 Montgomery County homes we have tested came in at or above the EPA action level. With 3,627 Montco tests since 2012, we can show you radon results for 43 towns.
$190 · 2-day test (48-hour minimum) · PA DEP-certified radon tester
King of Prussia and Hatboro produced Montco’s top readings
Our highest Montgomery County results, 121.3 pCi/L in King of Prussia and 116.4 in Hatboro, were each about 30 times the EPA action level. And high readings are not a thing of the past: a Lafayette Hill home measured 60.5 in May 2025.
Detached home · August 2019
Detached home · May 2014
Detached home · May 2025
What 3,627 Montgomery County radon tests tell us
26.1% of Montgomery County homes we tested were at or above 4.0 pCi/L, and another 33.3% fell between 2.0 and 3.9, so nearly 6 in 10 Montco homes tested above 2.0. The median was 2.3 pCi/L.
Our recent results are higher, not lower: 28.5% of Montco homes we tested in 2024 to 2026 were 4.0+. Our highest Montgomery County readings, 121.3 and 116.4 pCi/L, came from detached homes in King of Prussia and Hatboro.
How Montgomery County results break down
Share of 3,627 homes in each result range
Share of homes at 4.0+ pCi/L, by county
ValueGuard tests, 2012–2026, vs. EPA national estimate
Montgomery County radon results by town
Penn Valley, Flourtown, Gladwyne, Jenkintown, Royersford and Harleysville lead our list, each at about 40% or higher. Lower Merion communities (Bala Cynwyd, Wynnewood, Merion Station, Ardmore, Narberth) cluster in the mid-20s to about 30%. Villanova, Schwenksville, Phoenixville and Willow Grove were among the lowest.
Montgomery County average (26.1%)U.S. average, EPA estimate (6.7%) · Bar length runs from 0 to 60%. Colors compare each area with the U.S. average.
| Town | Homes tested | Median | Share of homes at 4.0+ pCi/L |
|---|---|---|---|
| Penn Valley (small sample) | 47 | 3.7 | 44.7%1 in 2.2 |
| Flourtown (small sample) | 36 | 3.0 | 41.7%1 in 2.4 |
| Gladwyne (small sample) | 41 | 2.7 | 41.5%1 in 2.4 |
| Jenkintown | 91 | 3.0 | 40.7%1 in 2.5 |
| Royersford | 67 | 2.6 | 40.3%1 in 2.5 |
| Harleysville (small sample) | 48 | 2.8 | 39.6%1 in 2.5 |
| Pottstown | 104 | 2.9 | 33.7%1 in 3 |
| Oreland (small sample) | 43 | 2.9 | 32.6%1 in 3.1 |
| Elkins Park | 136 | 2.3 | 32.4%1 in 3.1 |
| Huntingdon Valley | 72 | 2.5 | 31.9%1 in 3.1 |
| Bala Cynwyd | 107 | 2.6 | 30.8%1 in 3.2 |
| Hatfield (small sample) | 34 | 2.4 | 29.4%1 in 3.4 |
| Wyncote (small sample) | 38 | 2.4 | 28.9%1 in 3.5 |
| Conshohocken | 124 | 2.3 | 28.2%1 in 3.5 |
| Bryn Mawr | 89 | 2.3 | 28.1%1 in 3.6 |
| Gilbertsville (small sample) | 25 | 2.3 | 28.0%1 in 3.6 |
| Haverford (small sample) | 25 | 2.7 | 28.0%1 in 3.6 |
| Wynnewood | 82 | 2.9 | 28.0%1 in 3.6 |
| Merion Station | 68 | 2.5 | 27.9%1 in 3.6 |
| Wyndmoor | 51 | 2.8 | 27.5%1 in 3.6 |
| Lafayette Hill | 87 | 2.3 | 26.4%1 in 3.8 |
| Hatboro | 53 | 2.5 | 26.4%1 in 3.8 |
| Ardmore | 67 | 2.7 | 25.4%1 in 3.9 |
| Eagleville (small sample) | 37 | 2.1 | 24.3%1 in 4.1 |
| North Wales | 96 | 2.0 | 24.0%1 in 4.2 |
| Collegeville | 123 | 2.4 | 23.6%1 in 4.2 |
| Plymouth Meeting | 77 | 2.4 | 23.4%1 in 4.3 |
| Narberth | 82 | 2.2 | 23.2%1 in 4.3 |
| Horsham (small sample) | 44 | 2.6 | 22.7%1 in 4.4 |
| Cheltenham (small sample) | 44 | 2.1 | 22.7%1 in 4.4 |
| Blue Bell | 125 | 2.0 | 22.4%1 in 4.5 |
| Ambler | 125 | 2.2 | 21.6%1 in 5 |
| King of Prussia | 136 | 2.0 | 20.6%1 in 5 |
| Lansdale | 156 | 2.2 | 20.5%1 in 5 |
| Glenside | 173 | 2.0 | 20.2%1 in 5 |
| Abington | 71 | 2.3 | 19.7%1 in 5 |
| Fort Washington (small sample) | 37 | 2.5 | 18.9%1 in 5 |
| Norristown | 181 | 1.7 | 18.2%1 in 5 |
| Dresher (small sample) | 39 | 2.4 | 15.4%1 in 6 |
| Willow Grove | 76 | 2.0 | 13.2%1 in 8 |
| Phoenixville (small sample) | 25 | 2.0 | 12.0%1 in 8 |
| Schwenksville (small sample) | 43 | 2.2 | 11.6%1 in 9 |
| Villanova (small sample) | 44 | 1.8 | 9.1%1 in 11 |
No match in our table. Areas with fewer than 25 tested homes aren’t listed. Call 215-860-3150 and we’ll tell you what we’ve seen nearby.
Towns are mailing-address names with at least 25 tested homes. Bryn Mawr, Wynnewood, Haverford and Villanova addresses span county lines; these figures cover the Montgomery County side only.
Four things Montgomery County buyers assume about radon
On 45.5% of the 156 streets where we’ve tested three or more homes, at least one came in under 2.0 pCi/L and another came in at 4.0 or higher. Next door is not a forecast.
25.5% of Montco homes tested in a finished basement were 4.0+, about 1 in 4, versus 30.9% in unfinished basements.
15.5% of attached Montgomery County homes we tested were 4.0+, about 1 in 6.
Summer and winter ran lower in Montco (about 23%) than spring and fall (29 to 31%). A summer result near the line deserves a follow-up long-term test.
How a ValueGuard radon test works in Montgomery County
Pennsylvania requires hired radon testers to be certified by the PA Department of Environmental Protection, and real estate tests follow a specific state protocol. Most of our Montgomery County radon tests are placed during the home inspection, so there is one appointment and your result lands inside the inspection contingency. A ValueGuard radon test is $190 and runs 2 days, with a 48-hour minimum test period.
Windows and exterior doors stay closed (except for normal entry and exit) starting 12 hours before the test and for the whole test. We send the seller or occupant clear instructions in advance.
In most Montgomery County homes that means the basement, finished or unfinished. The device sits away from drafts, sump pits, and exterior walls, per PA DEP protocol.
Short-term real estate tests run at least 48 hours. Anti-tampering measures are used and a non-interference agreement is signed, both required for Pennsylvania real estate radon tests.
Your report shows the average radon level for the test period and where it falls against the EPA action level, so you and your agent can decide quickly what, if anything, to negotiate.
What your radon result means
Radon is measured in picocuries per liter of air (pCi/L). EPA estimates radon causes about 21,000 lung cancer deaths a year in the U.S. and is the leading cause of lung cancer among non-smokers.
Low. No action needed, though EPA notes there is no known completely safe level. Retest after major renovations or if you finish the basement.
Below the action level, but EPA suggests homeowners consider reducing radon in this range. Many buyers use this result to plan a future system or a long-term retest.
At or above the EPA action level. EPA recommends fixing the home. In a sale, this is usually resolved with a seller-installed mitigation system (with a post-mitigation retest) or a credit.
Why Montgomery County buyers and agents choose ValueGuard
Family-owned ASHI inspection company with 94,000+ inspections completed across Southeastern PA.
A dedicated team handles radon, mold, lead and sewer testing, so your test is placed and retrieved on schedule.
We have tested more than 22,000 homes for radon since 2012, which is where every number on this page comes from.
1,400+ Google reviews and BBB accredited. Pair radon with your home inspection in one visit.
Montgomery County radon testing FAQs
How much does radon testing cost in Montgomery County?
A ValueGuard radon test in Montgomery County is $190. The test runs 2 days (a 48-hour minimum under PA DEP protocol) and is performed by a PA DEP-certified radon tester. Most clients add it to their home inspection so the monitor is placed during the same visit.
How common is high radon in Montgomery County?
In our data, 26.1% of Montgomery County homes tested since 2012 were at or above 4.0 pCi/L, about 1 in 4, and that rose to 28.5% for tests from 2024 to 2026.
Which Montgomery County towns have the highest radon?
Penn Valley (44.7% at 4.0+), Flourtown, Gladwyne, Jenkintown, Royersford and Harleysville led our data. Lower Merion communities generally ran between 23% and 31%.
Is a townhome in Montgomery County less likely to have radon?
Somewhat. 15.5% of attached homes we tested in Montco were 4.0+, versus 28.5% of detached homes. That is still about 1 in 6, so testing is worth it.
How long does a radon test take?
A Pennsylvania real estate radon test runs at least 48 hours under closed-house conditions, which start 12 hours before the test.
What happens if the radon level is high?
EPA recommends fixing homes at 4.0 pCi/L or above. Most sellers have a PA DEP-certified mitigator install a system with a follow-up test, or offer a credit.
Can radon testing be done with my home inspection?
Yes. We place the radon monitor during the inspection visit so you are not coordinating a second appointment.
Book your Montgomery County radon test
Add radon testing to your home inspection in Lower Merion, Abington, Lansdale, King of Prussia, Blue Bell or anywhere in Montgomery County.
About this data: figures come from 3,627 radon tests ValueGuard performed in Montgomery County from December 2012 through November 2026. Each home is counted once (its first test), and homes that already had a radon mitigation system are excluded. The U.S. comparison is EPA’s estimate that nearly 1 in 15 homes has radon at or above 4.0 pCi/L. Results from other homes cannot predict the radon level in yours. The only way to know is to test.